Importance of Vehicle Body Elements and Rear Axle Elements for Describing Road Booming Noise

Abstract

For investigating influences of vehicle components on the acoustic comfort at low frequencies, e.g., the booming noise behavior of a vehicle, building a whole car simulation model is useful. To reduce the model’s complexity and to save resources in the validation process, we first identify relevant components before building the model. Based on previous studies, we focus on the vehicle’s body and the rear axle. In this paper, we analyze which axle and body elements are crucial for describing road booming noise. For this purpose, we use impact measurements to examine noise transfer functions of the body and a vibro-acoustical modal analysis to identify coupled modes between the body’s structure and the interior cavity. For investigating relevant force paths from the rear axle to the body, we used a chassis test bench. We identify the main transmission paths of road booming noise and highlight which axle and body components have an influence on them. Mainly the rear axle in its upright direction in combination with a rigid body movement of the rear tailgate coupled with the first longitudinal mode of the airborne cavity causes road booming noise. Furthermore, the rear axle steering, the active roll stabilization and the trim elements of the vehicle’s body are essential to describe road booming noise. The results can be used to set priorities in the validation of individual axle and body components for future simulation models. We found that the ventilation openings, the front seats, the headliner, and the cockpit of a vehicle have little influence on its noise transfer functions from the rear axle connection points to the driver’s ear between 20 and 60 Hz.