Characterization of Local Residual Stress at Blade Surfaces by the V(z) Curve Technique

Abstract

The characterization of residual stress in complicated components is a tough issue. The method of Rayleigh surface wave-based V(z) curve is adopted in this work to evaluate the distribution of residual stresses in aeroengine blades. First, the velocity of Rayleigh surface wave in aeroengine blade was measured by the V(z) curve technique, which can be used to calculate the local residual stress because the change of velocity is thought to be correlated with the contribution from residual stress. Two kinds of plastic-deformed Ti-6Al-4V samples were fabricated by ball-gun shooting to artificially induce distribution of residual stress and then measured by the proposed method. The results indicate that the distribution of the residual stress in both of the samples displays a predictable symmetry. The error of the measured stress is much less than 10% of the yielding stress in Ti-6Al-4V (i.e., about 800 MPa). Finally, the measured residual stresses were verified by X-ray diffraction method, whose results correlate reasonably well with each other. The proposed V(z) curve method and its experimental set-up appear to be a potential in characterizing residual stress at a point-like region, such as in complicated components.