Method for Accuracy Assessment of the Length Measurement Unit of Laser Tracking Systems

Abstract

Laser tracking systems are widely used in large-scale metrology of geometric quantities. Their importance is confirmed by the fact that one of the parts of the ISO 10360 series of standards has been devoted to the issue of assessing their accuracy (ISO 10360-10). A laser tracker is a device whose final measurement result is calculated using indications from various subsystems included in it, such as devices for measuring length and angle. The analysis of these individual impacts can be useful in creating simulation models of accuracy which, in regard to the Industry 4.0 concept, seem to be the most justified in terms of speed of operation and ease of use. For this reason, it may be particularly important to undertake research on the accuracy of this component in isolation from other factors affecting the measurement of the coordinates of the point. The article describes a method that allows separation of the length measurement error from the other components. The method uses a high-accuracy interferometer which is treated as a reference system that allows for the comparison of indications obtained using the tested distance measurement system. Thanks to the proposed method, it is possible to minimize errors from the optical system and other measuring systems. The use of a precise linear guide allows the reduction of errors related to the implementation of linear motion. The article presents the test method and the results obtained from performed experiments, as well as formulates conclusions and the directions of further development.