The Synthesis of Cu–Mn–Al Mixed-Oxide Combustion Catalysts by Co-Precipitation in the Presence of Starch: A Comparison of NaOH with Organic Precipitants

Abstract

Cu–Mn mixed oxides are well known as active combustion catalysts. The common method for their synthesis is based on co-precipitation, with NaOH as a precipitant, and is burdened with the possibility of introducing undesired Na contamination. This work describes the use of two organic bases, tetrabutylammonium hydroxide and choline hydroxide, as precipitating agents in a novel alkali-free route for Cu–Mn–Al catalyst synthesis. To obtain fine crystalline precursors, which are considered advantageous for the preparation of active catalysts, co-precipitation was carried out in the presence of starch gel. Reference materials prepared with NaOH in the absence of starch were also obtained. Mixed oxides were produced by calcination at 450 °C. The precursors contained MnCO3 doped with Cu and Al, and an admixture of amorphous phases. Those prepared in the presence of starch were less crystalline and retained biopolymer residues. The combustion of these residues during calcination enhanced the formation of larger amounts of the Cu1.5Mn1.5O4 spinel phase, with better crystallinity in comparison to catalysts prepared from conventionally synthesized precursors. Tests of toluene combustion demonstrated that the catalysts prepared with starch performed better than those obtained in starch-free syntheses, and that the mixed oxides obtained by the alkali-free route were more active than catalysts prepared with NaOH. Catalytic data are discussed in terms of property–performance relationships.