Development of Side Silicone Mold for Reducing Shape Error of Free-Form Concrete Panel-Reference-Cited by-同舟云学术

Development of Side Silicone Mold for Reducing Shape Error of Free-Form Concrete Panel

Published:2023-02-10 Issue:2 Volume:13 Page:480
ISSN:2075-5309
Container-title:Buildings
language:en
Short-container-title:Buildings

Author:

Jeong Kyeongtae¹,Lee Moonse¹,Oh Jisu¹,Lee Donghoon¹^ORCID

Affiliation:

1. Department of Architectural Engineering, Hanbat National University, Daejeon 34158, Republic of Korea

Abstract

Errors that occur on the side shape of Free-form Concrete Panels (FCP) can cause errors in the FCP construction stage. Therefore, the error generated in FCPs must be reduced. Accordingly, side mold development and research are being carried out. However, in the case of studies using side silicone molds, there was no detailed information about the specifications and application methods of molds, and there was no support between molds. When producing FCPs with the method stated above, there is a high possibility for the mold to be pushed due to the side pressure of concrete, which can cause errors on the side shape of FCPs. Therefore, two new types of side silicone molds were developed in this study. In order to verify the performance difference between the newly developed mold and existing molds, FCP production tests and error analysis were performed. In result, the developed mold decreased the average error difference of the FCP side by 3–5 times compared to the existing mold. In addition, the significance of the average error difference with the produced FCP was verified, and results showed that the difference of the average error was significant at a 95% confidence level.

Funder

National Research Foundation of Korea

Publisher

MDPI AG

Subject

Building and Construction,Civil and Structural Engineering,Architecture

Link

https://www.mdpi.com/2075-5309/13/2/480/pdf

Reference18 articles.

1. Jeong, S.C. (2014). An Analysis of the Conceptualization, Representation and Implementation Process of Major Free-Form Buildings in South Korea since Year 2000. [Master’s Thesis, University of YONSEI]. Available online: https://library.yonsei.ac.kr/search/detail/CAT000000894269?briefLink=/main/searchBrief?q=%EC%A0%95%EC%84%B1%EC%B2%A0.

2. An Analysis and Improvement of Free Form Building’s Construction Productivity—Focused on Exposed Concrete Work;Lee;Korean J. Constr. Eng. Manag.,2013

3. Construction Issues of Irregular-Shaped Buildings;Lee;J. Archit. Inst. Korea,2008

4. Jeong, K. (2021). Development of Two-Sided CNC and Side Mould Control Equipment for Automatic Manufacture of Free-Form Concrete Panel. [Master ’s Thesis, Hanbat National University]. Available online: http://lib.hanbat.ac.kr/search/detail/CATTOT000000403731.

5. An, J.Y. (2011). A Study on the Lessons Learned for Improving Efficiency of Free-Form Facade Construction. [Master’s Thesis, Seoul National University of Science and Technology]. Available online: https://library.seoultech.ac.kr/#/search/detail/526979.