Polyethylene (PE) Waste Minimization Study of Cement Mortar with Adding PE Content under Different W/B Ratios

Abstract

Wastes can be effectively used in concrete and the characteristics of concrete can be maintained or enhanced, the economy of waste management can be greatly increased, and the pollution of the earth can be reduced. This study aimed to research the durability of cement mortar prepared using different W/B ratios and different percentages of waste PE content. The cement mortar was mixed with 0%, 1%, 2%, 3%, and 4% waste PE and 20% ground-granulated blast-furnace slag (GGBFS) in W/B ratios of 0.4, 0.5, and 0.6. The results sw that the slump and flow decrease as the waste PE content is increased and increase with increasing W/B ratio, and the setting time is shortened as the waste PE content is increased. In terms of hardened properties, the specimen strength is slightly decreased as the waste PE content is increased, but the hardened properties are better at a later age due to the pozzolanic reaction of slag, which can be verified by microscopic SEM.