Affiliation:
1. School of Energy and Mining Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China
Abstract
Directed at the problems of low positioning accuracy and irregular section forming of cutting heads of road header in coal mine production sites, a new cutting head positioning system based on ultra-wideband positioning technology is proposed based on the cutting head motion model and the working principle of ultra-wideband positioning technology, which verifies the anti-interference and the accuracy of its positioning. Combined with the simulation experiment under on-site working conditions, the influence degree of three typical influencing factors on positioning accuracy was obtained, and the accuracy optimization of the ultra-wideband positioning system was guided. Through the dynamic solution experiment, the positioning accuracy of the system is measured, and the results are verified based on the positioning system solution accuracy evaluation standard.
Subject
Process Chemistry and Technology,Chemical Engineering (miscellaneous),Bioengineering
Reference24 articles.
1. Research and practice on intelligent coal mine construction (primary stage);Wang;Coal Sci. Technol.,2019
2. Wan, J.C., Zhang, X.H., Zhang, C., Yang, W., Lei, M., Du, Y., and Dong, Z. (2023). Vision and Inertial Navigation Combined-Based Pose Measurement Method of Cantilever Roadheader. Sustainability, 15.
3. Status and development of robotization research on roadheader for coal mines;Yang;J. China Coal Soc.,2020
4. Understanding GPS. Principles and applications;Rycroft;J. Atmos. Sol. Terr. Phys.,1997
5. Laser Beams-Based Localization Methods for Boom-Type Roadheader Using Underground Camera Non-Uniform Blur Model;Yang;IEEE Access,2020