Abstract
The present study explores the use of carbon dots coated with Iron (II, III) oxide (Fe3O4) for its application as an anode in microbial fuel cells (MFC). Fe3O4@PSA-C was synthesized using a hydrothermal-assisted probe sonication method. Nanoparticles were characterized with XRD, SEM, FTIR, and RAMAN Spectroscopy. Different concentrations of Fe3O4- carbon dots (0.25, 0.5, 0.75, and 1 mg/cm2) were coated onto the graphite sheets (Fe3O4@PSA-C), and their performance in MFC was evaluated. Cyclic voltammetry (CV) of Fe3O4@PSA-C (1 mg/cm2) modified anode indicated oxidation peaks at −0.26 mV and +0.16 mV, respectively, with peak currents of 7.7 mA and 8.1 mA. The fluxes of these anodes were much higher than those of other low-concentration Fe3O4@PSA-C modified anodes and the bare graphite sheet anode. The maximum power density (Pmax) was observed in MFC with a 1 mg/cm2 concentration of Fe3O4@PSA-C was 440.01 mW/m2, 1.54 times higher than MFCs using bare graphite sheet anode (285.01 mW/m2). The elevated interaction area of carbon dots permits pervasive Fe3O4 crystallization providing enhanced cell attachment capability of the anode, boosting the biocompatibility of Fe3O4@PSA-C. This significantly improved the performance of the MFC, making Fe3O4@PSA-C modified graphite sheets a good choice as an anode for its application in MFC.
Subject
Physical and Theoretical Chemistry,Catalysis,General Environmental Science
Cited by
20 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献