Fabrication of Dimensional and Structural Controlled Open Pore, Mesoporous Silica Topographies on a Substrate

Abstract

Open pore mesoporous silica (MPS) thin films and channels were prepared on a substrate surface. The pore dimension, thickness and ordering of the MPS thin films were controlled by using different concentrations of the precursor and molecular weight of the pluronics. Spectroscopic and microscopic techniques were utilized to determine the alignment and ordering of the pores. Further, MPS channels on a substrate surface were fabricated using commercial available lithographic etch masks followed by an inductively coupled plasma (ICP) etch. Attempts were made to shrink the channel dimension by using a block copolymer (BCP) hard mask methodology. In this regard, polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer (BCP) thin film forming perpendicularly oriented PEO cylinders in a PS matrix after microphase separation through solvent annealing was used as a structural template. An insitu hard mask methodology was applied which selectively incorporate the metal ions into the PEO microdomains followed by UV/Ozone treatment to generate the iron oxide hard mask nanopatterns. The aspect ratio of the MPS nanochannels can be varied by altering etching time without altering their shape. The MPS nanochannels exhibited good coverage across the entire substrate and allowed direct access to the pore structures.