Comparative Assessment of Different Modelling Schemes and Their Applicability to Inland Small Reservoirs: A Central Europe Case Study

Abstract

Sustainable landscape management involve also water reservoir management. The demand of their reconstruction represents a good opportunity for redesigning hydrotechnical structures and their parameters using recent methods and models. The estimation of wind-driven waves on small water reservoirs and their effects on water reservoir structures rarely are applied, although it is an important part of the dam height calculation. The analysis of wave run-up on the upstream face of the dam was performed by means of the Slovak Technical Standard (STN), Coastal Engineering Manual (CEM), Shore Protection Manual (SPM) and model designed by American Society of Agricultural and Biological Engineers (ASABE). The estimations of the wave characteristics differ depending on the model; wave height (H13%) within the range 0.32–0.56 m, wave period 1.32–2.11 s and run-up (R2%) 0.84–1.68 m under conditions of design wind speed 25 m·s−1. Results obtained by CEM, SPM models predict lower values than STN and ASABE models. Since the height difference between the dam crest and still water level in the reservoir is only 0.90 m, we can expect overtopping of the crest by waves after the critical wind speed is exceeded.