Abstract
In order to secure a supply of forest biomass, as well as promote further utilization following the completion of the Feed-in-Tariff Scheme for Renewable Energy (FIT), small-diameter trees such as cleanings from young planted forests and broad-leaved trees from coppice forests are prospective resources in Japan. The goal of this study was to discuss effective methods for harvesting the small-diameter trees that are unutilized forest biomass in Japan. This study assumed a simplified model forest and conducted experiments and time studies of the harvesting of small-diameter trees with a truck-mounted multi-tree felling head. As a result, the machine used in the experiment could fell a maximum of six trees inward in a row from a forest road. However, the harvesting cost (felling, accumulating and chipping) was cheapest when the machine felled five trees inward in a row. Lengthening the maximum reach of a felling head to fell trees deeper inward in a row appeared effective in increasing the number of harvested trees. From the perspective of minimizing the harvesting cost, however, there were upper limits to the number of trees felled inward as well as to the maximum reach of a felling head. The results of a sensitivity analysis suggested the following machine improvements could be considered in future policy: increasing the moving velocity of a felling head and the maximum number of trees that can be held at a time are effective if it is possible to lengthen the maximum reach of a felling head. Meanwhile, shortening the machine’s moving time among operation points is also effective if the maximum reach of a felling head cannot be lengthened.
Funder
Japan Society for the Promotion of Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献