Abstract
Crystallization kinetics of various blends of poly(lactic acid) (PLA)/polyolefin elastomer (POE) was studied through nonisothermal experimental investigations and theoretical approaches. The PLA/POE blends were prepared in a melt mixing process by using two types of POEs and compatibilizers. The rubber phases used were adopted on the basis of polyethylene (PE) and polypropylene (PP) type olefin elastomers. The effects of two kinds of compatibilizers containing ethylene vinyl acetate copolymer (EVA) and ethylene acrylic ester-glycidyl methacrylate terpolymer (EGMA) on the morphology and various parameters of crystallization of PLA were investigated using scanning electron microscopy (SEM) and differential scanning calorimeter (DSC) measurements, respectively. The morphology investigations on PLA blends containing PP based olefin elastomers showed that the introduction of EGMA compatibilizer into the matrix led to a more than 100% reduction in the size of the rubber droplets. The experimental measurements of crystallization behavior of various PLA/POE blends showed that the POEs and compatibilizers could cause a fall in the initial crystallization temperature more than 13 °C. The theoretical approaches used for studying the kinetics of crystallization of PLA in the presence of various POEs and compatibilizers indicated a decrease in the crystallinity of PLA and a 64% reduction in the activation energy compared to the neat PLA. The results suggest that the largest variation in the crystallization kinetic parameters of PLA was resulted from the PP based olefin elastomer and EGMA compatibilizer.
Subject
Engineering (miscellaneous),Ceramics and Composites
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献