Preparation and Performance of Radiata-Pine-Derived Polyvinyl Alcohol/Carbon Quantum Dots Fluorescent Films

Abstract

In this study, the low-cost processing residue of Radiata pine (Pinus radiata D. Don) was used as the lone carbon source for synthesis of CQDs (Carbon quantum dots) with a QY (The quantum yield of the CQDs) of 1.60%. The CQDs were obtained by the hydrothermal method, and +a PVA-based biofilm was prepared by the fluidized drying method. The effects of CQDs and CNF (cellulose nanofibers) content on the morphology, optical, mechanical, water-resistance, and wettability properties of the PVA/CQDs and PVA/CNF/CQDs films are discussed. The results revealed that, when the excitation wavelength was increased from 340 to 390 nm, the emission peak became slightly red-shifted, which was induced by the condensation between CQDs and PVA. The PVA composite films showed an increase in fluorescence intensity with the addition of the CNF and CQDs to polymers. The chemical structure of prepared films was determined by the FTIR spectroscopy, and no new chemical bonds were formed. In addition, the UV transmittance was inversely proportional to the change of CQDs content, which indicated that CQDs improved the UV barrier properties of the films. Furthermore, embedding CQDs Nano-materials and CNF into the PVA matrix improved the mechanical behavior of the Nano-composite. Tensile modulus and strength at break increased significantly with increasing the concentration of CQDs Nano-materials inside the Nano-composite, which was due to the increased in the density of crosslinking behavior. With the increase of CQDs content (>1 mL), the water absorption and surface contact angle of the prepared films decreased gradually, and the water-resistance and surface wettability of the films were improved. Therefore, PVA/CNF/CQDs bio-nanocomposite films could be used to prepare anti-counterfeiting, high-transparency, and ultraviolet-resistant composites, which have potential applications in ecological packaging materials.