Multi-Fidelity Modelling of the Effect of Combustor Traverse on High-Pressure Turbine Temperatures

Abstract

As turbine entry temperatures of modern jet engines continue to increase, additional thermal stresses are introduced onto the high-pressure turbine rotors, which are already burdened by substantial levels of centrifugal and gas loads. Usually, for modern turbofan engines, the temperature distribution upstream of the high-pressure stator is characterized by a series of high-temperature regions, determined by the circumferential arrangement of the combustor burners. The position of these high-temperature regions, both radially and circumferentially in relation to the high-pressure stator arrangement, can have a strong impact on their subsequent migration through the high-pressure stage. Therefore, for a given amount of thermal power entering the turbine, a significant reduction in maximum rotor temperatures can be achieved by adjusting the inlet temperature distribution. This paper is aimed at mitigating the maximum surface temperatures on a high-pressure turbine rotor from a modern commercial turbofan engine by conducting a parametric analysis and optimization of the inlet temperature field. The parameters considered for this study are the circumferential position of the high-temperature spots, and the overall bias of the temperature distribution in the radial direction. High-fidelity unsteady (phase-lag) and conjugate heat transfer simulations are performed to evaluate the effects of inlet clocking and radial bias on rotor metal temperatures. The optimized inlet distribution achieved a 100 K reduction in peak high-pressure rotor temperatures and 7.5% lower peak temperatures on the high-pressure stator vanes. Furthermore, the optimized temperature distribution is also characterized by a significantly more uniform heat load allocation on the stator vanes, when compared to the baseline one.