Author:
Hou Hong-Ling,Zhang Guang-Peng,Xin Chen,Zhao Yong-Qiang
Abstract
In the internal thread extrusion forming, if the process parameters are not selected properly, the extrusion torque will increase, the extrusion temperature will be too high, or even the tap will break. In order to obtain effective process parameters under certain working conditions, this paper uses a combination of numerical simulation and process experiment to analyze the influence of the bottom hole diameter, extrusion speed, and friction factor on the extrusion torque and extrusion temperature. Through an orthogonal experiment, the significant influence law of different process parameters on the extrusion torque and extrusion temperature was studied, and the order of their influence was determined. Based on the optimal process parameters, numerical simulations and process tests were carried out, and the extrusion effect and related parameters were compared and analyzed. The results show that the extruded thread has clear contour, uniform tooth pitch, complete tooth shape, and good flatness. Compared with before optimization, the maximum extrusion torque has been reduced by 37.15%, the maximum temperature has been reduced by 29.72%, and the extrusion quality has been improved. It shows that the optimized method and optimized process parameters have good engineering practicability.
Subject
General Materials Science
Reference17 articles.
1. Study on Influence of Die Angle in Cold Extrusion on Properties of Nano Sic Reinforced 6061 Aluminum Alloy;Kumar;Mater. Today Proc.,2019
2. Fractal Geometry of Internal Thread Surfaces Manufactured by Cutting Tap and Rolling Tap;Talu;Manuf. Lett.,2020
3. Key Technologies for Extrusion Forming Process of Internal Thread;Fan;J. Netshape Form. Eng.,2018
4. Experimental Research on Internal Thread Formation by Cold Extrusion Based on Low Frequency Vibration;Liang;Acta Aeronautica Astronautica Sinica,2013
5. Optimization of Tap Parameters for Internal Thread Cold Extrusion of High Strength Steel Based on Genetic Algorithm;Miao;Key Eng. Mater.,2010
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献