Preparation of Polyimide Films with Ultra-Low Dielectric Constant by Phase Inversion

Abstract

Due to the high value of its dielectric constant, polyimide does not meet the requirements of the development of integrated circuits and high-frequency printed circuits. The development of novel low dielectric constant polyimide materials for the preparation of flexible copper clad laminates is of theoretical and practical significance in the application of polyimide for 5G communications. In this work, different fluorinated graphene/polyamic acids (FG/PAA) were used as the precursor, and the porous polyimide film was successfully prepared by phase inversion. The dielectric constant of the porous polyimide film is relatively low, being less than 1.7. When the content of fluorinated graphene is 0.5 wt%, the overall dielectric performance of the porous film is the best, with a dielectric constant of 1.56 (10 kHz) and a characteristic breakdown field strength of 56.39 kV/mm. In addition, the mechanical properties of the film are relatively poor, with tensile strengths of 13.87 MPa (0.2 wt%), 13.61 MPa (0.5 wt%), and 6.25 MPa (1.0 wt%), respectively. Therefore, further improving the breakdown resistance and mechanical properties of the porous film is essential for the application of porous ultra-low dielectric polyimide materials.