Abstract
A series of pressure-sensitive adhesives (PSA) were prepared by emulsion polymerization in order to obtain a PSA that meet with the current label market requirements. For it, the effect of the incorporation of acrylonitrile (ACN) as hard monomer was investigated in a n-butyl acrylate (n-BA) and acrylic acid (AA) system. Great differences were found in the adhesive performance according to the ACN weight ratio. Its increased resulted in a considerable rise in the average sol molecular weight and in the glass transition temperature. This was reflected in a decrease of adhesion forces (peel resistance and tack) and an increase of the cohesion forces (shear resistance). Moreover, the incorporation of the minimum amount of ACN studied showed a great change in the elastic modulus determined by dynamic shear resistance with respect to the based formulation that did not contain ACN. Finally, the ice bucket test was carried out to check the adhesive performance in cold and wet environments.
Funder
Agency for Administration of University and Research
Subject
Polymers and Plastics,General Chemistry
Reference40 articles.
1. Construction and Classes of Pressure-Sensitive Products;Benedek,2009
2. Acrylic adhesives;Foreman,2009
3. Pressure-Sensitive Adhesive (PSAs);Paul,2011
4. ASTM Commitee E02 on Terminology,2005
5. A review on mechanical properties of pressure sensitive adhesives
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献