Abstract
To analyze the effects of nonlinear behavior characteristics of prepreg (PPG) among the insulating materials of substrate and the residual stress of laminating process on the warpage of substrate, this study investigated the continuous laminating process using the numerical analysis by finite element method. The analysis results showed that the warpage of the substrate in the laminating process of PPG was very low, but it increased rapidly in the solder resist (SR) laminating process. As the laminating process of PPG continued, the stress inside the substrate increased continuously and it was predicted to decrease in the SR laminating process. These results confirmed that the warpage of the substrate is influenced the most by the SR laminating process, and that the warpage and stress of substrate accumulated in the laminating process of PPG have significant effects on the final warpage.
Subject
Polymers and Plastics,General Chemistry
Reference30 articles.
1. Electrophoretic deposition onto an insulator for thin film preparation toward electronic device fabrication;Shougo;Appl. Phys. Lett.,2012
2. Numerical Analysis of Thermal Deformation of a PCB for Semiconductor Package at Panel, Strip and Unit Levels;Cho;Microelectron. Packag. Soc.,2019
3. Study on Behavior Characteristics of Embedded PCB for FCCSP Using Numerical Analysis;Cho;Microelectron. Packag. Soc.,2020
4. Modelling of temperature distribution along PCB thickness in different substrates during reflow
5. Effects of Surface Finish on the Shear Fatigue of SAC-Based Solder Alloys
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献