Analysis of Electric Field Distribution for SOI-FET Sensors with Dielectrophoretic Control

Abstract

Silicon-on-insulator (SOI) nanowire or nanoribbon field-effect transistor (FET) biosensors are versatile platforms of electronic detectors for the real-time, label-free, and highly sensitive detection of a wide range of bioparticles. At a low analyte concentration in samples, the target particle diffusion transport to sensor elements is one of the main limitations in their detection. The dielectrophoretic (DEP) manipulation of bioparticles is one of the most successful techniques to overcome this limitation. In this study, TCAD modeling was used to analyze the distribution of the gradient of the electric fields E for the SOI-FET sensors with embedded DEP electrodes to optimize the conditions of the dielectrophoretic delivery of the analyte. Cases with asymmetrical and symmetrical rectangular electrodes with different heights, widths, and distances to the sensor, and with different sensor operation modes were considered. The results showed that the grad E2 factor, which determines the DEP force and affects the bioparticle movement, strongly depended on the position of the DEP electrodes and the sensor operation point. The sensor operation point allows one to change the bioparticle movement direction and, as a result, change the efficiency of the delivery of the target particles to the sensor.