Abstract
To improve the strength properties, adhesion, and the thermal cycling resistance of ceramic coatings, the titanium alloy surface was modified with copper ions under different processing times. It is found that at the maximum processing time, the thickness of the alloyed layer reaches 12 μm. It is shown that the modified layer has a multiphase structure in addition to the main α and β–titanium phases with the intermetallic compounds of the Ti-Cu system. The parameters of the fine structure of the material are investigated by the X-ray diffraction analysis. It has been found that when the surface of the titanium alloy is modified, depletion occurs in the main alloying elements, such as aluminum and vanadium, the crystal lattice parameter increases, the root-mean-square (rms) displacements of the atoms decrease, and the macrostresses of compression arise. A multilevel micro- and nanoporous nanocrystalline structure occurs, which leads to an increase in the adhesion and the thermal cyclic resistance of the ceramic coating based on Si-Al-N.
Subject
General Materials Science,Metals and Alloys
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献