Assessment of Polymer Concrete Sample Geometry Effect on Ultrasonic Wave Velocity and Spectral Characteristics

Abstract

In this paper an analysis of the influence of polymer concrete sample shape and dimensions on ultrasonic wave propagation is carried out. Compositions of tested fly ash polymer concretes were determined using a material optimization approach. The tests were carried out on the samples of three shapes: cubes, beams, and plates. The ultrasonic testing was done by a direct method (transmission method) using a digital ultrasonic flow detector and piezoelectric transducers of 100 kHz central frequency. Propagation of the ultrasonic wave was characterized by pulse velocity. Frequency spectra and time-frequency spectrograms obtained using Fourier transform and Fourier-based synchrosqueezing transform were also presented. The correlation analysis showed that neither the path length nor the lateral dimension to the direction of wave propagation are not statistically significant for the UPV variability. However, a general trend of decrease in the UPV with increasing the path length was noticed. The analysis of the signal in time-frequency domain seemed to be useful in the analysis of particulate composites properties, especially when UPV changes are not clear enough, since it revealed greater differences in relation to changes in sample geometry than frequency spectra analysis.