Finite Element Analysis and Experimental Investigation of Tool Chatter in Ultra-Precision Diamond Micro-Milling Process
-
Published:2022-11-23
Issue:23
Volume:12
Page:11968
-
ISSN:2076-3417
-
Container-title:Applied Sciences
-
language:en
-
Short-container-title:Applied Sciences
Author:
Zhang Haijun, Lu ShijinORCID, Zhang Chunyu, Li Guo, Teng Fei, Zhang JunjieORCID, Sun Tao
Abstract
Ultra-precision milling with an aerostatic high-speed spindle and a single-crystal diamond micro-tool is promising for the fabrication of miniaturized complex parts. While tool chatter occurring in milling processes has a substantial effect on the machined surface formation, a fundamental understanding of the tool chatter behavior in ultra-precision milling is essentially required for achieving an ultra-high surface finish. In this paper, through a combination of finite element simulations and experimental validations, the machining mechanisms of the ultra-precision diamond micro-milling of a copper workpiece are revealed, in which the tool chatter behavior and its correlation with the machined surface morphology are emphatically studied. Specifically, the correlation between the tool chatter and the transient depth of cut is analytical established. Subsequently, we first establish a finite element model of diamond micro-milling with the consideration of milling tool deformation and material removal to reveal the tool chatter behavior during the milling process. Furthermore, a corresponding micro-milling experiment is also conducted to validate the simulation results in terms of the milling force, chip profile and morphology of machined surfaces. Finally, the effect of spindle speed on the milling process in particular tool chatter is investigated by FE simulations, through which a linear relationship between the spindle speed and microscopic roughness Rz of a machined surface is obtained. The research findings provide a theoretical basis for understanding the origination of tool chatter in the diamond micro-milling process, as well as the rational selection of machining parameters for suppressing the tool chatter.
Funder
National Natural Science Foundation of China Science Challenge Project
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference22 articles.
1. High flux symmetry of the spherical hohlraum with octahedral 6LEHs at the hohlraum-to-capsule radius ratio of 5.14;Phys. Plasmas,2014 2. Li, X., Wu, C., Dai, Z., Zheng, W., Zhao, Y., Zhang, H., Gu, J., Kang, D., Ge, F., and Gu, P. (2016). Review of the three candidate hohlraums in ICF. arXiv. 3. Octahedral spherical hohlraum and its laser arrangement for inertial fusion;Phys. Plasmas,2014 4. Recent progress in ICF target fabrication at RCLF;Matter Radiat. Extremes,2018 5. Montesanti, R.C., Seugling, R.M., Klingmann, J.L., Dzenitis, E.G., Alger, E.T., Miller, G.L., Kent, R.A., Castro, C., Reynolds, J.L., and Carrillo, M.A. (2008). Robotic System for Precision Assembly of NIF Ignition Targets.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|