Abstract
There are many accidents in road traffic involving both heavy goods vehicles and passenger vehicles, and the interpretation of the causes of some accidents can be very difficult. The paper presents the results of an analysis of the road accident causes involving a truck and two passenger cars. The hypothesis was verified that the incident took place after the damage to the front wheel of the truck, which resulted in an uncontrolled change of the direction of its travel and leaving the lane in the opposite direction of the passenger cars. The damaged tire was inspected, and traces were described in the form of cracks on the side surface, irregular abrasion on the central part of the side surface and near the bead, as well as deformations resulting from damage to the cord. The thesis was made that the tire cracked as a result of its material structure defects. In order to verify it, bench tests were carried out on the deformation of the tire sidewall at various load conditions, which simulated driving with too little air pressure in the tire. Detailed studies of the fracture of the tire sidewall and the wires that make up its steel cord were carried out. Macroscopic examination of the cord wires on eight samples revealed the presence of corrosion changes that should not occur under normal operating conditions. The results of the research work indicate that tire rupture was caused by delamination of the material coatings and corrosion of the steel cord wires. These defects could have arisen due to the earlier cracking of the rubber layer and the ingress of moisture or as a result of the use of corroded steel cord wires in tire production. In the analyzed case, the driver could not regain control of the vehicle and avoid a collision with oncoming vehicles.
Funder
Polish Ministry of Science and Higher Education
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference63 articles.
1. Failure analysis and identification of causes of SRC system malfunctions—Case study;Hlatka;Eng. Fail. Anal.,2021
2. Krmela, J., and Krmelova, V. (2017, January 24–26). Tire casings and their material characteristics for computational modelling of tires. Proceedings of the Engineering for Rural Development, Jelgava, Latvia.
3. Tire modelling and contact problems: Advances and trends in the development of computational models for tires;Noor;Comput. Struct.,1985
4. State of the Art for High Tensile Strength Steel Cord;Tashiro;Nippon Steel Technical Report,2003
5. The fatigue strength of bidirectionally bent steel cord used in tyres;Kruzel;Eng. Fail. Anal.,2019
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献