Investigating the Electrocoagulation Treatment of Landfill Leachate by Iron/Graphite Electrodes: Process Parameters and Efficacy Assessment

Abstract

Electrocoagulation is a widely used method for treating leachate since it is cost effective and eco-friendly. In the present study, the electrocoagulation process was employed to remove chemical oxygen demand (COD), NH4+, total dissolved solids (TDS), total suspended solids (TSS), turbidity, and color from landfill leachate. At first, lime was used as a pretreatment, then the Fe/Gr and Ti/PbO2/steel electrodes were used, and the optimum electrode was selected. Afterwards, the effects of some variables, including pH, current density, temperature, the inter-electrode distance, and the type of electrolyte were investigated. Results showed that COD, NH4+, TSS, TDS, electrical conductivity (EC), turbidity, color, and pH of effluent pretreatment chemical reached 22,371, 385, 884, 21,820 (mg/L), 13.8 (ms/cm3), 1355 (NTU), 8500 (TCU) and 10, respectively (the removal efficiency was 0, 20.37, 32.4, 61.99, 59.18, and 56.6 percent). With the Fe/Gr electrode, the optimal condition was observed as follows: pH of 7.5, current density of 64 mA/cm2, inter-electrode distance was equal to 1.5 cm, temperature at 20 °C, and retention time 2–4 h. Overall, the electrocoagulation with the Fe/Gr electrode was a suitable technology for landfill leachate treatment due to its effectiveness for the removal of both COD and NH4+, with advantageous performance indicators.