Continuous-Flow Microwave Heating Inactivation Kinetics of α-Amylase from Bacillus subtilis and a Comparison with Conventional Heating Conditions

Abstract

The inactivation kinetics of an α-amylase enzymatic time-temperature integrator (TTI) from Bacillus subtilis (BAA) under continuous-flow microwave (MW) and conventional heating conditions were evaluated and compared in this study. The TTI dispersed in a buffer solution (pH 5.0 to 6.9) at 20 °C initially, and it was continuously circulated through two helical coils connected in a series for heating. The two coils were positioned in two domestic microwave ovens (2450 MHz and 1000 W nominal capacity each) and connected by a short tube. The sample flow rates were adjusted to result in a specific exit temperature in the range of 65 to 80 °C. A short fully insulated helical coil at the exit of the second oven was used as a holding tube. Test samples were drawn either at the exit of the second MW oven or immediately after the holding tube. The decimal reduction times obtained under conventional batch heating conditions decreased from 66 to 24 s as the temperature changed from 70 to 75 °C at pH 5.0 while they decreased from 8 to 5 s under MW in the same temperature range, but at pH 6.0, they increased both under conventional and microwave heating conditions (138 to 120 s and 89 to 61 s, respectively). The D-values under conventional thermal holding were four–eight times higher than under a continuous-flow MW heating condition. By varying the pH, the D-values could be modified to suit the validation of appropriate processing conditions.