Affiliation:
1. CERIS (Civil Engineering Research and Innovation for Sustainability), Instituto Superior Técnico, 1049-001 Lisboa, Portugal
2. ENERCRET Gmbh, 6832 Röthis, Austria
Abstract
Ground source heat pump (GSHP) systems depend on the capacity for heat transfer between the system and the ground, and it is good practice to carry out an in situ thermal response test (TRT) to determine the undisturbed ground temperature, the thermal conductivity of the ground, and the thermal resistance of the borehole. Conventionally, a TRT is undertaken in a replica borehole heat exchanger (BHE); however, alternative methods have been developed that can provide continuous depth-resolved temperature recordings. The enhanced TRT (ETRT) uses a hybrid cable system which incorporates a resistance heating wire to provide a linear heat source and a fibre optic cable to measure the temperature along the length of the borehole. In this paper, a case study is presented in which a TRT and ETRT were carried out in the same BHE to evaluate its thermal response and estimate the thermal characteristics of the ground. After a brief introduction of both methods and their interpretation, a comparison between them is presented regarding their advantages and disadvantages using the results of the performed tests, which revealed an 8% difference in the soil thermal conductivity values, averaged over the length of the BHE.
Funder
Foundation for Science and Technology (FCT) of Portugal
FCT’s support of the research unit CERIS
Reference31 articles.
1. Ground heat exchangers—A review of systems, models and applications;Florides;Renew. Energy,2007
2. Current status of ground source heat pumps and underground thermal energy storage in Europe;Sanner;Geothermics,2003
3. Strategic optimization of borehole heat exchanger field for seasonal geothermal heating and cooling;Bayer;Appl. Energy,2014
4. Sanner, B., Hellström, G., Spitler, J., and Gehlin, S. (2005, January 24–29). Thermal Response Test—Current Status and World-Wide Application. Proceedings of the World Geothermal Congress, Antalya, Turkey.
5. (2015). Geotechnical Investigation and Testing—Geothermal Testing—Determination of Thermal Conductivity of Soil and Rock Using a Borehole Heat Exchanger (Standard No. ISO 17628:2015).