Abstract
This study investigated the evolution of density, grain size, and pore characteristics during the sintering of metal injection molding (MIM) 420, 420 + 0.3C and pre-alloyed 420Nb stainless steel powders. The results show that C promotes the reduction of oxides on the surface of stainless steel, thereby accelerating sintering at 1330 °C, which is the initial sintering stage of MIM 420. MIM 420Nb showed the slowest sintering rate due to the strong binding force between Nb and C. At 1350 °C, the sintering densities of MIM 420 and 420 + 0.3C slightly improved, whereas their grain sizes grew significantly. Scanning electron microscopy images show grain boundary-pore separation, which significantly retarded the grain boundary diffusion mechanism and hence reduced the densification rate. The addition of C accelerated the pore-grain boundary separation; thus MIM 420 + 0.3C showed the lowest density at this temperature among the materials analyzed in this study. Nb suppressed the grain growth rate; thus, MIM 420Nb exhibited the highest density among the three materials. At 1370 °C, MIM 420 + 0.3C reached the highest density owing to the creation of a liquid phase. Theoretical calculations proved that there is a linear relationship between the grain boundary area per unit volume and the interfacial pore area per unit volume. Furthermore, when the ratio of grain size to pore size is 28, the contact probability between the grain boundaries and pores is significantly reduced to approximately 10%, leading to an extremely slow densification rate and a rapid grain growth rate, which is consistent with the experimental results.
Funder
National Natural Science Foundation of China
Scientific Research Foundation of Hunan Provincial Education Department
The Guangdong Academy of Sciences Project of Science and Technology Development
Guangdong Basic and Applied Basic Research Foundation
Subject
General Materials Science,Metals and Alloys