Evaluation of the Performance of Two Australian Waste-Plastic-Modified Hot Mix Asphalts

Abstract

The construction of hundreds of kilometres of roads around the world every year results in the consumption of large amounts of raw materials and the depletion of natural resources. In addition, technologically advanced countries such as Australia are currently facing a major issue regarding the waste materials produced daily by their citizens. The disposal of these waste materials is a critical issue faced by municipalities in modern cities. Currently, using waste materials in civil and construction engineering is of great interest to researchers and industry. This study investigates the impact of using waste polyethylene terephthalate to modify asphalt mixtures following Australian design guidelines and criteria. Different types of asphalt are used to investigate and determine the mechanical properties of modified asphalt mixtures. The Marshall stability, Marshall flow, Marshall quotient, and wheel-tracking tests were tested. The Marshall stability, Marshall flow, and MQ of the Marshall test results exhibited significant improvements when using PET in modified SMA and AC mixtures. It can be seen that the 8% PET produced a mixture with the highest stability of 19.78 kN. The lowest rut depth was about 2.08 mm for samples modified with 8% PET.