Experimental Calibration of a Homogeneous Substitute Material Model for Reinforced High-Performance Concrete Modeling

Abstract

The purpose of this work was to develop a substitute material model for the analysis of reinforced concrete structures. This paper presents proposals to solve the problem of limited calculation time, both to perform simulation models and to perform effective numerical or analytical analyses of structural elements in order to achieve results consistent with experimental results. Achieving this aim is conditional upon the determination of the material model parameters, taking into account the type of structure, the system of reinforcement, and the static strength–deformation parameters of the component materials. A universal procedure is proposed for determining the parameters of the substitute material model on the basis of the homogenization function, in which the homogenization coefficient is assumed as being equal to the effective reinforcement ratio of real reinforced concrete structural elements. In addition, the introduction of a new concrete constraint coefficient to this procedure, which corresponds to the proportionality coefficient of biaxial to uniaxial compressive strength, is proposed. On the basis of the conducted comparative analyses, the possibility of using the hypothetical substitute material model for the design of building elements and structures was confirmed. The average values of the obtained results for individual research series did not differ from the experimental results by more than 8.5%, for both the numerical and analytical models.