Study on Two-Phase Mixing Inside Flow Focusing/Blurring Nozzle by Gray Distribution Analysis Method

Abstract

The application prospect of a flow focusing/blurring nozzle is broad but research on gas-liquid flow inside the nozzle is not comprehensive. The gas-liquid mixing inside the nozzle is difficult to study by visualization experiment, so this paper proposes to study the gas-liquid flow or mixing inside the nozzle by the gray scale level distribution of the experimental images. The results show that the increase of air flow rate is beneficial to two-phase mixing inside the nozzle, while the influence of water flow rate, tube hole distance (the distance between inner tube and nozzle outlet) and orifice diameter increase is opposite. The influence of air inertia force on two-phase mixing is weaker than the water inertia force under different parameters, the effect of the air inertia force on two-phase mixing is similar to tube hole distance under a small flow rate, the effect of the orifice diameter on two-phase mixing is relatively weak. In addition, the analysis of the gas-liquid flow field in the mixing zone shows that the gas-liquid flow in the nozzle is stable in the flow focusing mode. In the flow blurring mode, the gas-liquid flow inside the nozzle has radial stability but axial pulsation. In the transition mode, the gas-liquid flow inside the nozzle is unstable, but the gas-liquid flow is close to the flow blurring mode.