Highly Thermal Conductive and Electrical Insulating Epoxy Composites with a Three-Dimensional Filler Network by Sintering Silver Nanowires on Aluminum Nitride Surface

Abstract

In this study, a new fabrication technique for three-dimensional (3D) filler networks was employed for the first time to prepare thermally conductive composites. A silver nanowire (AgNW)– aluminum nitride (AlN) (AA) filler was produced by a polyol method and hot-pressed in mold to connect the adjacent fillers by sintering AgNWs on the AlN surface. The sintered AA filler formed a 3D network, which was subsequently impregnated with epoxy (EP) resin. The fabricated EP/AA 3D network composite exhibited a perpendicular direction thermal conductivity of 4.49 W m−1 K−1 at a filler content of 400 mg (49.86 vol.%) representing an enhancement of 1973% with respect to the thermal conductivity of neat EP (0.22 W m−1 K−1). Moreover, the EP/AA decreased the operating temperature of the central processing unit (CPU) from 86.2 to 64.6 °C as a thermal interface material (TIM). The thermal stability was enhanced by 27.28% (99 °C) and the composites showed insulating after EP infiltration owing to the good insulation properties of AlN and EP. Therefore, these fascinating thermal and insulating performances have a great potential for next generation heat management application.