Affiliation:
1. Unidad de Investigación y Tecnología Aplicadas de la UNAM (UNITA), Facultad de Química, Universidad Nacional Autónoma de México (UNAM), Apodaca 66628, Mexico
Abstract
The galvanic corrosion behavior of the AA7075–CS1018 couple was examined in dynamic electrolytes using the ZRA technique. A modified electrochemical setup was developed to support the use of thin-film gel and liquid electrolytes on metallic surfaces. This allowed the collection of chemical information, left behind by the liquid electrolyte during evaporation, through a thin-film gel. The analysis of the gel electrolyte film confirmed the acidification on AA7075 and the alkalinization on CS1018 but also offered novel insights on their dependence on the galvanic current. The galvanic current was proportional to the initial NaCl concentration in the range of 0.01 to 0.06 M. However, due to continuous evaporation, the NaCl concentration increased, limiting oxygen diffusion and decreasing the galvanic current, especially for electrolytes exceeding 0.06 M. The galvanic current was determined by considering the dynamic evolution (caused by the evaporation of the electrolyte film) of both the thickness of the electrolyte and its concentration.
Reference81 articles.
1. Ahmad, Z. (2006). Principles of Corrosion Engineering and Corrosion Control, Butterworth-Heinemann.
2. Alcántara, J., de la Fuente, D., Chico, B., Simancas, J., Díaz, I., and Morcillo, M. (2017). Marine Atmospheric Corrosion of Carbon Steel: A Review. Materials, 10.
3. Popov, B.N. (2015). Corrosion Engineering, Elsevier.
4. Development of the Electrochemical Theory of Metallic Corrosion;Tomashov;Corrosion,1964
5. Comparison Study on the Corrosion Behavior of Aluminum Alloys in Different Acidic Media;Adams;Mater. Today Proc.,2021