Investigation of the Relationship between Permanent Deformation and Dynamic Modulus Performance for Bearing-Layer Asphalt Mixture

Abstract

Of major concern is the lack of correlation between the material design and structural function of asphalt pavement in China. The objective of this paper is to identify the layer in asphalt pavement where permanent deformation occurs most seriously and to propose a control index for that layer’s asphalt mixture. The permanent deformation of each layer was determined through the utilization of thickness measurements obtained from field cores. The results indicate that the reduction in thickness is more significant in the driving lane than in the ridge band and shoulder. This phenomenon can be attributed to the intensified densification and shearing deformation that arise from the combined impacts of recurrent axle loads and high temperatures. Compared to surface and base layers, the bearing layer is the primary area of concern for permanent deformation in asphalt pavement. Therefore, it is imperative to incorporate the ability of bearing-layer asphalt mixture to withstand permanent deformation as a crucial design parameter. The dynamic modulus of the bearing-layer asphalt mixture is significantly influenced by the type of asphalt, gradation, and asphalt content, compared to other design parameters. Based on the relationship established between dynamic modulus and dynamic stability, with creep rate as the intermediate term, a control standard was proposed to evaluate the permanent deformation of the bearing-layer asphalt mixture. This study can provide reasonable and effective guidance for prolonging pavement life and improving pavement performance.