The Effect of Mining Remnants on Elastic Strain Energy Arising in the Tremor-Inducing Layer

Abstract

A vast majority of hard coal deposits in Poland have a multi-seam structure, hence the presence of mining remnants left from previous operations. The impact of those remnants (exploitation edges or residual pillars) can further intensify geomechanical phenomena occurring in the rock mass, leading to changes in the original state of stress. This applies to all layers within the rock strata, including thick and coherent ones (referred to as tremor-inducing layers) where the impacts of mining remnants are likely to trigger tremors, thus enhancing the rock bursts hazard. In the light of the geomechanical model of rock strata recalled in the study, it is assumed that homogeneous and isotropic elastic layers are found between the considered mining remnant (which is revealed as the stress distribution), and the rock medium modelled as a homogeneous and isotropic half-plane. Development of the state of stress in the bedded medium was brought down to the analysis of interacting elastic layers, where the biharmonic equation is satisfied for each layer and for each respective half-plane. This equation can be solved by the integral Fourrier transform method. The impacts of the exploitation edge and the residual pillar on the elastic strain energy in the tremor-inducing layer is illustrated by recalling the Burzyński’s stress criterion. Strain energy in the tremor-inducing layer was analysed for various deformation properties of the surrounding strata and for various methods of coal extraction from the seam underneath the tremor-inducing layer. The results of the study evidence that a change in deformation properties of strata in the vicinity of the tremor-inducing layer may affect the state of stress and strain energy, which impacts on the tremor hazard levels in the vicinity of mining remnants areas.