Experimental Studies and Numerical Simulations of FRP Poles Failure in the Area of Inspection Hole

Abstract

Glass fiber-reinforced polymer (GFRP) utility poles are becoming more widespread in European countries. To ensure the integrity and safety of poles, it is necessary to carefully examine their structural features. The purpose of this paper is to present the numerical model of a column made with the engineering simulation software ANSYS and to compare the experimentally determined values of the stresses that lead to column failure close to the inspection hole with the results obtained using the numerical model. The critical buckling and failure loads for GFRP poles, as well as the associated modes of failure, were correctly predicted by the finite element method used in this study. Failure occurred in the middle of the inspection hole’s longer edge at a stress level of 220–250 MPa. A comparison of the stress using the ANSYS simulation software that led to the destruction of the column with those measured experimentally using strain gauges revealed a good agreement between their values.