Efficiency Enhancing Technique for Rod Fiber Picosecond Amplifiers with Optimal Mode Field Matching
-
Published:2023-02-15
Issue:2
Volume:14
Page:450
-
ISSN:2072-666X
-
Container-title:Micromachines
-
language:en
-
Short-container-title:Micromachines
Author:
Liu Danni1, Mao Xiaojie2, Bi Guojiang2, Li Tianqi3, Zang Dawei1, Sun Ninghui1
Affiliation:
1. Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190, China 2. Science and Technology on Solid-State Laser Laboratory, North China Research Institute of Electro-Optics, Beijing 100015, China 3. The Science and Technology on Inertial Laboratory, School of Instrumentation and Opto-Electronics Engineering, Beihang University, Beijing 100191, China
Abstract
A high power and high quality picosecond laser is crucial in MEMS fabrication regarding micromachines. Optimal seed beam coupling is an important precondition to enhance laser efficiency. However, empirical coupling limits its development. In this paper, the physical parameters related to coupling are determined. The relationships among them are established under optical mode matching constraints to satisfy optimal seed beam coupling. According to a theoretical analysis, the focal length cut-off and the optimal coupling position of the coupling lens are acquired. A maximum transmittance of 87.2% is acquired with a 6 W input seed power in the validation experiment. In further power amplification experiments, a diffraction-limited beam quality is achieved, with M2X = 1.111, M2Y = 1.017, an optical efficiency of 60.5% and a slope efficiency of 66%, benefiting from the previous theoretical guidance.
Funder
Young Scientists Fund of the National Natural Science Foundation of China Foundation of the Chinese Academy of Sciences, China Strategic Priority Research Program of the Chinese Academy of Sciences, China
Subject
Electrical and Electronic Engineering,Mechanical Engineering,Control and Systems Engineering
Reference26 articles.
1. Li, Y., Guo, X., Wang, S., Zhang, S., Zhao, Y., Guo, D., Zhang, C., Liu, S., Cheng, G.J., and Liu, F. (2022). High-efficiency copper removal by nitrogen plasma-assisted picosecond laser processing. Micromachines, 13. 2. Wen, Q., Wei, X., Zhang, P., Lu, J., Jiang, F., and Lu, X. (2021). Enhanced microsphere-assisted picosecond laser processing for nanohole fabrication on silicon via thin gold coating. Micromachines, 12. 3. Markauskas, E., Zubauskas, L., Voisiat, B., and Gečys, P. (2022). Efficient water-assisted glass cutting with 355 nm picosecond laser pulses. Micromachines, 13. 4. Lye, C.S., Wang, Z., and Lam, Y.C. (2022). Multi-foci laser separation of sapphire wafers with partial thickness scanning. Micromachines, 13. 5. Generation of 167 w infrared and 124 w green power from a 1.3-ghz, 1-ps rod fiber amplifier;Zhao;Opt. Express,2014
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|