Design and Analysis of a 5-Degree of Freedom (DOF) Hybrid Three-Nozzle 3D Printer for Wood Fiber Gel Material
Author:
Chen Jifei,Zhao Qiansun,Wu Guifeng,Su Xiaotian,Chen Wengang,Du Guanben
Abstract
Wood is an organic renewable natural resource. Cellulose, hemicellulose and lignin in wood are used in tissue engineering, biomedicine and other fields because of their good properties. This paper reported that the possibility of wood fiber gel material molding and the preparing of gel material were researched based on the wood fiber gel material as a 3D printing material. A five-degree of freedom hybrid three nozzle 3D printer was designed. The structural analysis, static analysis, modal analysis and transient dynamic analysis of 3D printers were researched, and the theoretical basis of the 3D printer was confirmed as correct and structurally sound. The results showed that the 5-DOF hybrid 3-nozzle 3D printer achieved the 3D printing of wood fiber gel material and that the printer is capable of multi-material printing and multi-degree-of-freedom printing.
Funder
Scientific Research Fund Project of Yunnan Provincial Education Department
National Natural Science Foundation of China
Subject
Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces
Reference28 articles.
1. Recent advances in 3D printing technologies for wearable (bio)sensors
2. Additive manufacturing technology—Surrent status and future;Lu;China Mech. Eng.,2020
3. Development and application trends of 3D printers;Zhao;Pap. Equip. Mater.,2020
4. Wood Science;Liu,2012
5. Cellulose Nanofibrils Filled Poly(Lactic Acid) Biocomposite Filament for FDM 3D Printing
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献