Affiliation:
1. School of Materials Science and Engineering, Shenyang Jianzhu University, Shenyang 110168, China
Abstract
The TiO2-SiO2-Al2O3 composite coatings were fabricated on the surfaces of Q235 carbon steel via the sol-gel method to improve its corrosion resistance. The effects of the sintering temperature and the layer number on the corrosion performances were explored. The coating morphology, microstructure and phase composition were analyzed by scanning electron microscopy (SEM) and X-ray diffractometer (XRD). Friction wear experiment, immersion experiment, and electrochemical impedance spectroscopy techniques were used to investigate the corrosion properties of the coatings as well. The results show that the sample with the TiO2-SiO2-Al2O3 coatings sintered at 850 °C are more uniform and denser and have better corrosion resistance and wear resistance than the other coatings. The Rp value of the 3 L coating sintered at 850 °C was about 114 kΩ·cm2, and the average friction coefficient was about 0.36.
Funder
Liaoning Revitalization Talent Program
Subject
Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces
Reference42 articles.
1. Evaluation of Anticorrosive Coatings on Carbon Steel in Marine Environments: Accelerated Corrosion Test and Field Exposure;Vera;Int. J. Electrochem. Sci.,2018
2. A study on time-variant corrosion model for immersed steel plate elements considering the effect of mechanical stress;Yang;Ocean Eng.,2016
3. Materials science: Share corrosion data;Li;Nature,2015
4. Recent progress in superhydrophobic coatings used for steel protection: A review;Fihri;Colloids Surf. A Physicochem. Eng. Asp.,2017
5. Brenna, A., Ormellese, M., and Lazzari, L. (2013, January 17–21). A proposal of AC corrosion mechanism of carbon steel in cathodic protection condition. Proceedings of the NACE Corrosion Conference, Orlando, FL, USA.