Influence of Phosphoric Acid on the Adhesion Strength between Rusted Steel and Epoxy Coating

Abstract

In this work, we evaluated the influence of phosphoric acid in conjunction with a tannic converter formula on the adhesion of the coating system by employing the epoxy coating as the top coating. The morphology and the composition of the rusted steel before and after treatment were determined by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The adhesion test result showed that the adhesion strength between the rust and the epoxy coating was enhanced from 1.93 MPa to 11.63 MPa with the treatment by 50 g/L phosphoric acid in conjunction with a tannic converter formula. Further investigation of the working mechanism of such treatment revealed that the adhesion improvement could be attributed to the formation of a micro-cracked and compact conversion layer. This layer could reinforce the anchoring of epoxy coating through the pinning effect. It was also found that both the pH and the phosphate radical were the important factors to improve the adhesion strength.