Improve the Performance of SONOS Type UV TD Sensors Using IOHAOS with Enhanced UV Transparency ITO Gate

Abstract

This research demonstrates that an indium tin oxide–silicon oxide–hafnium aluminum oxide‒silicon oxide–silicon device with enhanced UV transparency ITO gate (hereafter E-IOHAOS) can greatly increase the sensing response performance of a SONOS type ultraviolet radiation total dose (hereafter UV TD) sensor. Post annealing process is used to optimize UV optical transmission and electrical resistivity characterization in ITO film. Via nano-columns (NCols) crystalline transformation of ITO film, UV transparency of ITO film can be enhanced. UV radiation causes the threshold voltage VT of the E-IOHAOS device to increase, and the increase of the VT of E-IOHAOS device is also related to the UV TD. The experimental results show that under UV TD irradiation of 100 mW·s/cm2, ultraviolet light can change the threshold voltage VT of E-IOHAOS to 12.5 V. Moreover, the VT fading rate of ten-years retention on E-IOHAOS is below 10%. The VT change of E-IOHAOS is almost 1.25 times that of poly silicon–aluminum oxide–hafnium aluminum oxide–silicon oxide–silicon with poly silicon gate device (hereafter SAHAOS). The sensing response performance of an E-IOHAOS UV TD sensor is greatly improved by annealed ITO gate.