Abstract
For the first time, Zr702 coatings were deposited onto an Al6061 alloy using a high-pressure cold spray (HPCS) system. In this work, five different N2 process gas temperatures between 700 and 1100 °C were employed to understand the formation of cold sprayed (CS) Zr coatings and their feasibility for enhanced wear resistance. Results indicated that the N2 processing gas temperature of about 1100 °C enabled a higher degree of particle thermal softening, which created a dense, robust, oxide- and defect-free Zr coating. Across all CS Zr coatings, there was a refinement of crystallinity, which was attributed to the severe localized plastic deformation of the powder particles. The enhanced thermal boost up zone at the inter-particle boundaries and decreased recoverable elastic strain were accountable for the inter-particle bonding of the coatings at higher process gas temperatures. The flattening ratio (ε) increased as a function of temperature, implying that there was a greater degree of plastic deformation at higher N2 gas temperatures. The microhardness readings and wear volume of the coatings were also improved as a function of process gas temperature. In this work, the wear of the Al6061 alloy substrate was mainly plowing-based, whereas the Zr CS substrates demonstrated a gradual change of abrasive to adhesive wear. From our findings, the preparation of CS Zr coatings was a feasible method of enhancing the wear resistance of Al-based alloys.
Subject
Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces
Cited by
12 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献