Author:
Liu Naiyu,Gao Jianguo,Xu Luyao,Wan Yong,Li Ruichuan
Abstract
The aim of this paper is to find an effective way to reduce the friction and wear of steel. CrCN coating was deposited on AISI 304 stainless steel by magnetron sputtering technology, and the friction and wear properties of the coating under glycerol lubrication were studied. The hardness of CrCN coatings on stainless steel surface can reach to 17.87 GPa when the carbon target deposition current is 2A. The CrCN coating presents low friction coefficient (COF) under the lubrication of glycerol, a highly efficient green lubricant. When the load is 0.5 N, the lowest friction coefficient is only 0.01. XPS analysis on the wear track suggested that glycerol decomposed during sliding and a fluid lubricating layer was formed, which provides ultralow friction. The paper shows that the glycerol could be used as an efficient lubricant for the CrCN coating.
Subject
Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献