Affiliation:
1. National-Local Joint Engineering Laboratory of Intelligent Manufacturing Oriented Automobile Die & Mould, Tianjin University of Technology and Education, Tianjin 300222, China
2. National Engineering Research Center for Remanufacturing, Army Academy of Armored Forces, Beijing 100072, China
Abstract
High-temperature oxidation resistance is the major influence on the high-temperature service stability of refractory high entropy alloys. The oxidation behavior of lightweight Al0.2CrNbTiV refractory high entropy alloy coatings with different dilution ratios at 650 °C and 800 °C deposited by high-speed laser cladding was analyzed in this paper. The oxidation kinetic was analyzed, the oxidation resistance mechanism of the Al0.2CrNbTiV coating was clarified with the analysis of the formation and evolution of the oxidation layer, and the effect of the dilution rate on high-temperature performances was revealed. The results showed that the oxide layer was mainly composed of rutile oxides (Ti, Cr, Nb)O2 after isothermal oxidation at 650 °C and 800 °C for 50 h. The Al0.2CrNbTiV coating in low dilution exhibited better oxidation performance at 650 °C, due to the dense oxide layer formed with the synergistic growth of fine AlVO3 particles and (Ti, Cr, Nb)O2, and higher percentage of Cr, Nb in (Ti, Cr, Nb)O2 strengthened the lattice distortion effect to inhibit the penetration of oxygen. The oxide layer formed at 800 °C for the Al0.2CrNbTiV coating was relatively loose, but the oxidation performance of the coating in high dilution improved due to the precipitation of Cr2Nb-type Laves phases along grain boundaries, which inhibits the diffusion of oxygen.
Funder
Tianjin Natural Science Foundation
National Natural Science Foundation of China
National key research and development program of China
Key research and development plan of Shaanxi Province