Properties of Different Waterproof Bonding Layer Systems for Cement Concrete Bridge Deck Pavement

Abstract

The performance of waterproof bonding layer systems significantly affects the service life of concrete bridge deck pavement. This article aims to compare the bonding properties and composite structure mechanical properties of different waterproof bonding layer systems in bridge deck pavement to recommend appropriate structures based on service conditions. To fulfill this objective, four kinds of waterproof bonding material composite systems were designed, and test samples were fabricated. Then, the waterproof bonding layer properties were studied by penetration resistance tests, scalding resistance tests, and corrosion resistance tests. Pull-off tests were conducted to compare the bonding properties. Then, dynamic modulus tests, Hamburg wheel tracking tests, and static load creep tests of composite structure specimens were implemented to evaluate the dynamic and static mechanical performances and water-temperature stability. The findings showed that the four schemes had good impermeability. The pull-off strengths of scheme III at 25 °C were about 2.5-, 2.5-, and 4-times those of schemes I, II, and IV, respectively, and the pull-off strengths at 50 °C were about 1.6-, 2-, and 1.6-times those of schemes I, II, and IV, respectively, and the bonding performances and dynamic modulus of different schemes were ranked as follows: III > I > II > IV. The results of the Hamburg wheel tracking test were consistent with the static load creep test. The high-temperature stability of scheme IV was the best, while the stabilities of scheme III and I were better than that of scheme II. In conclusion, the scheme of concrete bridge deck pavement can be selected based on the environmental conditions and traffic load, and schemes III and I should be considered first. The findings of this research could provide technical support for the future design of bridge deck waterproof bonding systems.