Influence of Laser Texturing and Coating on the Tribological Properties of the Tool Steels Properties-Reference-Cited by-同舟云学术

Influence of Laser Texturing and Coating on the Tribological Properties of the Tool Steels Properties

Published:2024-05-02 Issue:5 Volume:12 Page:311
ISSN:2075-1702
Container-title:Machines
language:en
Short-container-title:Machines

Author:

Moravčíková Jana¹^ORCID,Moravčík Roman²^ORCID,Sahul Martin²,Necpal Martin¹^ORCID

Affiliation:

1. Faculty of Materials Science and Technology in Trnava, Institute of Production Technology, Slovak University of Technology in Bratislava, 917 24 Trnava, Slovakia

2. Faculty of Materials Science and Technology in Trnava, Institute of Materials Science, Slovak University of Technology in Bratislava, 917 24 Trnava, Slovakia

Abstract

The article is aimed at identifying the influence of laser texturing and subsequent coating with a hard, wear-resistant coating AlCrSiN (nACRo®) on selected tribological properties of the analyzed tool steels for cold work, produced by conventional and powder metallurgy. The substrate from each steel was heat treated to achieve optimal properties regarding the chemical composition and the method of production of the material. Böhler K100 and K390 Microclean® steels were used. These are highly alloyed tool steels used for various types of tools intended for cold work. The obtained results show that the coefficient of friction is increased by coating, but the wear rate is lower compared to the samples which were only textured.

Funder

Scientific Grant Agency of the Ministry of Education, Science, Research and Sports of the Slovak Republic and the Slovak Academy of Sciences VEGA

Slovak Research and Development Agency

Publisher

MDPI AG

Link

https://www.mdpi.com/2075-1702/12/5/311/pdf

Reference33 articles.

1. Bhusnan, B. (2013). Introduction to Tribology, Ohio State University. [2nd ed.].

2. (2024, February 15). Why Is Tribology Important. Available online: https://www.stle.org/files/What_is_tribology/Tribology.aspx.

3. (2024, February 15). Anton Paar. Basics of Tribology. Available online: https://wiki.anton-paar.com/en/basics-of-tribology/.

4. (2024, January 12). Metal Spinning (Metal Spinners). Available online: https://www.iqsdirectory.com/articles/metal-spinning.html.

5. (2024, January 12). Metal Spinning 101: A Guide. Available online: https://www.metalcraftspinning.com/metal-spinning/.