Effect of Roundness Error of the Grooves on the Inner Ring Runout of Angular Contact Ball Bearings

Abstract

In this paper, a prediction model of the inner ring runout of angular contact ball bearings is established according to the geometric and kinematic relationships of the bearing, considering factors such as the roundness error of the inner and outer grooves, the dimensional error of the balls, and the change of the contact angle between the balls and the grooves. The correctness of the model is verified through experiments. The effects of the order and amplitude of the roundness error of the inner groove and the order and amplitude of the roundness error of the outer groove on the inner ring runout are analyzed. The coupling effect of the roundness error of the inner and outer grooves on the inner ring runout is further analyzed. The results show that the inner ring runout changes periodically with a change to the roundness error order of the grooves, which increases with an increase in the roundness error amplitude. Under the coupling of the roundness error of the inner and outer grooves, the magnification of the inner ring runout increases as a whole. When there are specific relationships between the roundness error orders of the grooves and the number of balls, the magnification of the axial or radial runout changes significantly.