Affiliation:
1. School of Mechano-Electronic Engineering, Xidian University, Xi’an 710071, China
Abstract
Driven by an eccentric mass through a two-layered cantilevered plectrum, the electromagnetic energy harvester (EEH) can convert low-frequency mechanical vibrations into continuous uni-directional rotation. To optimize the performance of the EEH, electromagnetic analysis of the EEH was conducted. Three-phase winding permanent magnet (PM) topology was employed, and combinations of different coils and magnet pole numbers were designed. Then, the finite element method (FEM) was applied to analyze the influence of the combinations of the coils and pole numbers as well as the PM dimensions on the three-phase induced voltage. Prototypes with different configurations were fabricated and the analysis effectiveness was confirmed. Furthermore, different types of stator yokes were designed to enhance the magnetic field. Compared to the original prototype, the output voltage of the optimal prototype increased by 0.5 V with the same rotation speed, and the harmonic components were sufficiently low. Then, experiments with excitation by linear reciprocating motions and swing motions were conducted. Under different exciting conditions, the optimal prototype can also induce the highest voltage amplitude. With an increase in the weight of the eccentric mass, a long duration can be reached that lasts up to 12 s. In summary, the proposed optimization can achieve a high-efficiency and high-power density EEH.
Funder
Natural Science Foundation of China
Natural Science Basic Research Plan in Shaanxi Province of China
Fundamental Research Funds for the Central Universities
Subject
Electrical and Electronic Engineering,Industrial and Manufacturing Engineering,Control and Optimization,Mechanical Engineering,Computer Science (miscellaneous),Control and Systems Engineering
Reference25 articles.
1. Piezoelectric energy harvesters for biomedical applications;Ali;Nano Energy,2019
2. Energy harvesters for wearable electronics and biomedical devices;Hasan;Adv. Mater. Technol.,2021
3. Different kinds of energy harvesters from human activities;Zhou;Int. J. Energy Res.,2021
4. Sun, F., Su, X., Song, H.-C., and Kang, C.-Y. (2022). Energy harvesting performance of a novel nonlinear quad-stable piezoelectric energy harvester with only one external magnet. Machines, 10.
5. Ultralow-frequency Piezo MEMS energy harvester using thin-film silicon and parylene substrates;Jackson;J. Micro-Nanolithography MEMS MOEMS,2018