Microstructure Evolution, Hardness, and Tribological Behaviors of Ti-50.8Ni SMA Alloy with Ultrasonic Surface Shot Peening Treatment

Abstract

To explore a new method to improve the wear resistance of TiNi shape memory alloy (SMA), Ti-50.8Ni alloy was treated by the method of ultrasonic surface shot peening. The microstructure evolution, hardness, and tribological behaviors have been further investigated to evaluate the effect of ultrasonic surface shot peening (USSP). The surface microstructure can be refined to some extent while the basic phase composition has little change. USSP can facilitate the martensitic transformation in the surface layer, which benefits improving the surface hardness. Additionally, the hardness of Ti-50.8Ni alloy increases first and then decreases with the increase of applied load, but the USSP-treated alloy tends to be more sensitive to load. USSP treatment can improve the wear resistance and reduce the coefficient of friction (COF) in case of a low sliding wear speed of 5 mm/s. However, the tribological properties of USSP-treated alloy are reversely worse in the case of 10 mm/s. This is mainly attributed to the combined effect of stress-induced martensite transformation and degeneration resulting from the frictional heating during the dry sliding wear process.