Technological, Microstructural and Strength Aspects of Welding and Post-Weld Heat Treatment of Martensitic, Wear-Resistant Hardox 600 Steel

Abstract

The study presents technological and structural aspects of production and heat treatment of welded joints of high-strength, abrasion-resistant Hardox 600 steel. As a result of the conducted research, it was found that the use of welding processes for joining this steel leads to the formation of a wide heat-affected zone, characterized by various structures favoring the reduction of abrasion resistance and deterioration of plastic properties, while increasing the susceptibility to brittle fracture. On the basis of the structural and strength characteristics, an effective welding technology for Hardox 600 steel was proposed, as well as the conditions and parameters of post-welding heat treatment, leading to obtaining structures close to a base material in the entire area of the welded joint. Despite the limited high-carbon equivalent CEV of the metallurgical weldability of the tested steel, the tests carried out in laboratory conditions allowed researchers to obtain welded joints characterized by very high strength indexes, corresponding to the base material, while maintaining satisfactory plastic and impact properties.