K-Means Module Division Method of FDM3D Printer-Based Function–Behavior–Structure Mapping
-
Published:2023-06-23
Issue:13
Volume:13
Page:7453
-
ISSN:2076-3417
-
Container-title:Applied Sciences
-
language:en
-
Short-container-title:Applied Sciences
Author:
You Ying1, Liu Zhiqiang1, Liu Youqian2, Peng Ning1, Wang Jian1, Huang Yizhe13, Huang Qibai3
Affiliation:
1. School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China 2. College of Engineering and Technology, Hubei University of Technology, Wuhan 430064, China 3. State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
Abstract
Product performance, function, cost, and the level of module generalization are all significantly influenced by product modular design, but different goods require different division indicators and techniques. The purpose of this study is to provide a set of appropriate modular division techniques for FDM 3D printers. This research offers an ecologically friendly module division index and uses module clustering as the module division principle in accordance with the current industrial development trend and the fundamental requirements of FDM 3D printer consumers in the current market. The K-means algorithm is used to use the Jaccard similarity coefficient as the metric of similarity of the DSM clustering process to realize the module division of the FDM 3D printer after studying the function–behavior–structure mapping model of the 3D printer. Additionally, the elbow method–cluster error variance and average contour coefficient evaluation systems were built, respectively, in order to verify the viability of the FDM 3D printer module division method and obtain the best module division results. By analyzing these two systems, it was discovered that when the FDM 3D printer was divided into three modules, the in-cluster error variance diagram obviously had an inflection point, and the average profile coefficient and other modular approaches that need to be adjusted to their respective goods can use this division method as a theoretical foundation and point of reference.
Funder
Hubei Provincial Central Leading Local Science and Technology Development Special Project
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference36 articles.
1. Design, Fabrication, and Experiments of a Soft Pneumatic Gripper with Closed-Loop Position Control;Uludag;J. Test. Eval.,2022 2. Application and challenges of 3D food printing technology in manned spaceflight: A review;Zhang;Int. J. Food Sci. Technol.,2022 3. Gao, G., Xu, F., Xu, J., Tang, G., and Liu, Z. (2022). A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts. Micromachines, 13. 4. Lupone, F., Padovano, E., Casamento, F., and Badini, C. (2022). Process Phenomena and Material Properties in Selective Laser Sintering of Polymers: A Review. Materials, 15. 5. Wang, H., Ba, S., Zhang, B., and Li, L. (2022). DLP Light-Curing 3D Printing Combustible Lighting Shell and Performance Study. Appl. Sci., 12.
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|